Enhancement: Add comment as per suggestion

This PR configures Treesitter to prefer git rather than expecting curl
to be installed. This prevevents a failure mode on WSL where curl is
optional.

.github/ISSUE_TEMPLATE/bug_report.md

@@ -9,13 +9,6 @@ assignees: ''
 
 <!-- Any bug report not following this template will be immediately closed. Thanks -->
 
-## Before Reporting an Issue
-- I have read the kickstart.nvim README.md.
-- I have read the appropriate plugin's documentation.
-- I have searched that this issue has not been reported before.
-
-- [ ] **By checking this, I confirm that the above steps are completed. I understand leaving this unchecked will result in this report being closed immediately.**
-
 ## Describe the bug
 <!-- A clear and concise description of what the bug is. -->
 
@@ -25,8 +18,8 @@ assignees: ''
 
 ## Desktop
 <!-- please complete the following information. -->
-- OS:
-- Terminal:
+- OS: 
+- Terminal: 
 
 ## Neovim Version
 <!-- Output of running `:version` from inside of neovim. -->

README.md

@@ -24,22 +24,20 @@ If you are experiencing issues, please make sure you have the latest versions.
 External Requirements:
 - Basic utils: `git`, `make`, `unzip`, C Compiler (`gcc`)
 - [ripgrep](https://github.com/BurntSushi/ripgrep#installation)
-- Clipboard tool (xclip/xsel/win32yank or other depending on the platform)
 - A [Nerd Font](https://www.nerdfonts.com/): optional, provides various icons
   - if you have it set `vim.g.have_nerd_font` in `init.lua` to true
-- Emoji fonts (Ubuntu only, and only if you want emoji!) `sudo apt install fonts-noto-color-emoji`
 - Language Setup:
-  - If you want to write Typescript, you need `npm`
-  - If you want to write Golang, you will need `go`
+  - If want to write Typescript, you need `npm`
+  - If want to write Golang, you will need `go`
   - etc.
 
-> [!NOTE]
+> **NOTE**
 > See [Install Recipes](#Install-Recipes) for additional Windows and Linux specific notes
 > and quick install snippets
 
 ### Install Kickstart
 
-> [!NOTE]
+> **NOTE**
 > [Backup](#FAQ) your previous configuration (if any exists)
 
 Neovim's configurations are located under the following paths, depending on your OS:
@@ -47,8 +45,8 @@ Neovim's configurations are located under the following paths, depending on your
 | OS | PATH |
 | :- | :--- |
 | Linux, MacOS | `$XDG_CONFIG_HOME/nvim`, `~/.config/nvim` |
-| Windows (cmd)| `%localappdata%\nvim\` |
-| Windows (powershell)| `$env:LOCALAPPDATA\nvim\` |
+| Windows (cmd)| `%userprofile%\AppData\Local\nvim\` |
+| Windows (powershell)| `$env:USERPROFILE\AppData\Local\nvim\` |
 
 #### Recommended Step
 
@@ -56,17 +54,12 @@ Neovim's configurations are located under the following paths, depending on your
 so that you have your own copy that you can modify, then install by cloning the
 fork to your machine using one of the commands below, depending on your OS.
 
-> [!NOTE]
-> Your fork's URL will be something like this:
+> **NOTE**
+> Your fork's url will be something like this:
 > `https://github.com/<your_github_username>/kickstart.nvim.git`
 
-You likely want to remove `lazy-lock.json` from your fork's `.gitignore` file
-too - it's ignored in the kickstart repo to make maintenance easier, but it's
-[recommended to track it in version control](https://lazy.folke.io/usage/lockfile).
-
 #### Clone kickstart.nvim
-
-> [!NOTE]
+> **NOTE**
 > If following the recommended step above (i.e., forking the repo), replace
 > `nvim-lua` with `<your_github_username>` in the commands below
 
@@ -83,13 +76,13 @@ git clone https://github.com/nvim-lua/kickstart.nvim.git "${XDG_CONFIG_HOME:-$HO
 If you're using `cmd.exe`:
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git "%localappdata%\nvim"
+git clone https://github.com/nvim-lua/kickstart.nvim.git %userprofile%\AppData\Local\nvim\
 ```
 
 If you're using `powershell.exe`
 
 ```
-git clone https://github.com/nvim-lua/kickstart.nvim.git "${env:LOCALAPPDATA}\nvim"
+git clone https://github.com/nvim-lua/kickstart.nvim.git $env:USERPROFILE\AppData\Local\nvim\
 ```
 
 </details>
@@ -103,17 +96,73 @@ nvim
 ```
 
 That's it! Lazy will install all the plugins you have. Use `:Lazy` to view
-the current plugin status. Hit `q` to close the window.
-
-#### Read The Friendly Documentation
+current plugin status. Hit `q` to close the window.
 
 Read through the `init.lua` file in your configuration folder for more
-information about extending and exploring Neovim. That also includes
-examples of adding popularly requested plugins.
+information about extending and exploring Neovim.
 
-> [!NOTE]
-> For more information about a particular plugin check its repository's documentation.
 
+#### Examples of adding popularly requested plugins
+
+NOTE: You'll need to uncomment the line in the init.lua that turns on loading custom plugins.
+
+<details>
+  <summary>Adding autopairs</summary>
+
+This will automatically install [windwp/nvim-autopairs](https://github.com/windwp/nvim-autopairs)
+and enable it on startup. For more information, see documentation for
+[lazy.nvim](https://github.com/folke/lazy.nvim).
+
+In the file: `lua/custom/plugins/autopairs.lua`, add:
+
+```lua
+-- File: lua/custom/plugins/autopairs.lua
+
+return {
+  "windwp/nvim-autopairs",
+  -- Optional dependency
+  dependencies = { 'hrsh7th/nvim-cmp' },
+  config = function()
+    require("nvim-autopairs").setup {}
+    -- If you want to automatically add `(` after selecting a function or method
+    local cmp_autopairs = require('nvim-autopairs.completion.cmp')
+    local cmp = require('cmp')
+    cmp.event:on(
+      'confirm_done',
+      cmp_autopairs.on_confirm_done()
+    )
+  end,
+}
+```
+
+</details>
+<details>
+  <summary>Adding a file tree plugin</summary>
+
+This will install the tree plugin and add the command `:Neotree` for you.
+For more information, see the documentation at
+[neo-tree.nvim](https://github.com/nvim-neo-tree/neo-tree.nvim).
+
+In the file: `lua/custom/plugins/filetree.lua`, add:
+
+```lua
+-- File: lua/custom/plugins/filetree.lua
+
+return {
+  "nvim-neo-tree/neo-tree.nvim",
+  version = "*",
+  dependencies = {
+    "nvim-lua/plenary.nvim",
+    "nvim-tree/nvim-web-devicons", -- not strictly required, but recommended
+    "MunifTanjim/nui.nvim",
+  },
+  config = function ()
+    require('neo-tree').setup {}
+  end,
+}
+```
+
+</details>
 
 ### Getting Started
 
@@ -121,9 +170,9 @@ examples of adding popularly requested plugins.
 
 ### FAQ
 
-* What should I do if I already have a pre-existing Neovim configuration?
+* What should I do if I already have a pre-existing neovim configuration?
   * You should back it up and then delete all associated files.
-  * This includes your existing init.lua and the Neovim files in `~/.local`
+  * This includes your existing init.lua and the neovim files in `~/.local`
     which can be deleted with `rm -rf ~/.local/share/nvim/`
 * Can I keep my existing configuration in parallel to kickstart?
   * Yes! You can use [NVIM_APPNAME](https://neovim.io/doc/user/starting.html#%24NVIM_APPNAME)`=nvim-NAME`
@@ -137,12 +186,12 @@ examples of adding popularly requested plugins.
     `~/.local/share/nvim-kickstart`. You can apply this approach to any Neovim
     distribution that you would like to try out.
 * What if I want to "uninstall" this configuration:
-  * See [lazy.nvim uninstall](https://lazy.folke.io/usage#-uninstalling) information
+  * See [lazy.nvim uninstall](https://github.com/folke/lazy.nvim#-uninstalling) information
 * Why is the kickstart `init.lua` a single file? Wouldn't it make sense to split it into multiple files?
   * The main purpose of kickstart is to serve as a teaching tool and a reference
     configuration that someone can easily use to `git clone` as a basis for their own.
     As you progress in learning Neovim and Lua, you might consider splitting `init.lua`
-    into smaller parts. A fork of kickstart that does this while maintaining the
+    into smaller parts. A fork of kickstart that does this while maintaining the 
     same functionality is available here:
     * [kickstart-modular.nvim](https://github.com/dam9000/kickstart-modular.nvim)
   * Discussions on this topic can be found here:
@@ -181,7 +230,7 @@ run in cmd as **admin**:
 winget install --accept-source-agreements chocolatey.chocolatey
 ```
 
-2. install all requirements using choco, exit the previous cmd and
+2. install all requirements using choco, exit previous cmd and
 open a new one so that choco path is set, and run in cmd as **admin**:
 ```
 choco install -y neovim git ripgrep wget fd unzip gzip mingw make
@@ -194,7 +243,7 @@ wsl --install
 wsl
 sudo add-apt-repository ppa:neovim-ppa/unstable -y
 sudo apt update
-sudo apt install make gcc ripgrep unzip git xclip neovim
+sudo apt install make gcc ripgrep unzip neovim
 ```
 </details>
 
@@ -204,24 +253,17 @@ sudo apt install make gcc ripgrep unzip git xclip neovim
 ```
 sudo add-apt-repository ppa:neovim-ppa/unstable -y
 sudo apt update
-sudo apt install make gcc ripgrep unzip git xclip neovim
+sudo apt install make gcc ripgrep unzip git neovim
 ```
 </details>
 <details><summary>Debian Install Steps</summary>
 
 ```
 sudo apt update
-sudo apt install make gcc ripgrep unzip git xclip curl
-
-# Now we install nvim
-curl -LO https://github.com/neovim/neovim/releases/latest/download/nvim-linux-x86_64.tar.gz
-sudo rm -rf /opt/nvim-linux-x86_64
-sudo mkdir -p /opt/nvim-linux-x86_64
-sudo chmod a+rX /opt/nvim-linux-x86_64
-sudo tar -C /opt -xzf nvim-linux-x86_64.tar.gz
-
-# make it available in /usr/local/bin, distro installs to /usr/bin
-sudo ln -sf /opt/nvim-linux-x86_64/bin/nvim /usr/local/bin/
+sudo apt install make gcc ripgrep unzip git
+echo "deb https://deb.debian.org/debian unstable main" | sudo tee -a /etc/apt/sources.list
+sudo apt update
+sudo apt install -t unstable neovim
 ```
 </details>
 <details><summary>Fedora Install Steps</summary>

init.lua

@@ -111,12 +111,9 @@ vim.opt.mouse = 'a'
 vim.opt.showmode = false
 
 -- Sync clipboard between OS and Neovim.
---  Schedule the setting after `UiEnter` because it can increase startup-time.
 --  Remove this option if you want your OS clipboard to remain independent.
 --  See `:help 'clipboard'`
-vim.schedule(function()
-  vim.opt.clipboard = 'unnamedplus'
-end)
+vim.opt.clipboard = 'unnamedplus'
 
 -- Enable break indent
 vim.opt.breakindent = true
@@ -135,6 +132,7 @@ vim.opt.signcolumn = 'yes'
 vim.opt.updatetime = 250
 
 -- Decrease mapped sequence wait time
+-- Displays which-key popup sooner
 vim.opt.timeoutlen = 300
 
 -- Configure how new splits should be opened
@@ -156,19 +154,17 @@ vim.opt.cursorline = true
 -- Minimal number of screen lines to keep above and below the cursor.
 vim.opt.scrolloff = 10
 
--- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
--- instead raise a dialog asking if you wish to save the current file(s)
--- See `:help 'confirm'`
-vim.opt.confirm = true
-
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()`
 
--- Clear highlights on search when pressing <Esc> in normal mode
---  See `:help hlsearch`
+-- Set highlight on search, but clear on pressing <Esc> in normal mode
+vim.opt.hlsearch = true
 vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
 
 -- Diagnostic keymaps
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
+vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
 vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
 
 -- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
@@ -194,12 +190,6 @@ vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right win
 vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
 vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
 
--- NOTE: Some terminals have colliding keymaps or are not able to send distinct keycodes
--- vim.keymap.set("n", "<C-S-h>", "<C-w>H", { desc = "Move window to the left" })
--- vim.keymap.set("n", "<C-S-l>", "<C-w>L", { desc = "Move window to the right" })
--- vim.keymap.set("n", "<C-S-j>", "<C-w>J", { desc = "Move window to the lower" })
--- vim.keymap.set("n", "<C-S-k>", "<C-w>K", { desc = "Move window to the upper" })
-
 -- [[ Basic Autocommands ]]
 --  See `:help lua-guide-autocommands`
 
@@ -217,12 +207,9 @@ vim.api.nvim_create_autocmd('TextYankPost', {
 -- [[ Install `lazy.nvim` plugin manager ]]
 --    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
 local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
-if not (vim.uv or vim.loop).fs_stat(lazypath) then
+if not vim.loop.fs_stat(lazypath) then
   local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
-  local out = vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
-  if vim.v.shell_error ~= 0 then
-    error('Error cloning lazy.nvim:\n' .. out)
-  end
+  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
 end ---@diagnostic disable-next-line: undefined-field
 vim.opt.rtp:prepend(lazypath)
 
@@ -245,22 +232,17 @@ require('lazy').setup({
   -- with the first argument being the link and the following
   -- keys can be used to configure plugin behavior/loading/etc.
   --
-  -- Use `opts = {}` to automatically pass options to a plugin's `setup()` function, forcing the plugin to be loaded.
+  -- Use `opts = {}` to force a plugin to be loaded.
   --
+  --  This is equivalent to:
+  --    require('Comment').setup({})
+
+  -- "gc" to comment visual regions/lines
+  { 'numToStr/Comment.nvim', opts = {} },
 
-  -- Alternatively, use `config = function() ... end` for full control over the configuration.
-  -- If you prefer to call `setup` explicitly, use:
-  --    {
-  --        'lewis6991/gitsigns.nvim',
-  --        config = function()
-  --            require('gitsigns').setup({
-  --                -- Your gitsigns configuration here
-  --            })
-  --        end,
-  --    }
-  --
   -- Here is a more advanced example where we pass configuration
-  -- options to `gitsigns.nvim`.
+  -- options to `gitsigns.nvim`. This is equivalent to the following Lua:
+  --    require('gitsigns').setup({ ... })
   --
   -- See `:help gitsigns` to understand what the configuration keys do
   { -- Adds git related signs to the gutter, as well as utilities for managing changes
@@ -287,60 +269,25 @@ require('lazy').setup({
   -- which loads which-key before all the UI elements are loaded. Events can be
   -- normal autocommands events (`:help autocmd-events`).
   --
-  -- Then, because we use the `opts` key (recommended), the configuration runs
-  -- after the plugin has been loaded as `require(MODULE).setup(opts)`.
+  -- Then, because we use the `config` key, the configuration only runs
+  -- after the plugin has been loaded:
+  --  config = function() ... end
 
   { -- Useful plugin to show you pending keybinds.
     'folke/which-key.nvim',
     event = 'VimEnter', -- Sets the loading event to 'VimEnter'
-    opts = {
-      -- delay between pressing a key and opening which-key (milliseconds)
-      -- this setting is independent of vim.opt.timeoutlen
-      delay = 0,
-      icons = {
-        -- set icon mappings to true if you have a Nerd Font
-        mappings = vim.g.have_nerd_font,
-        -- If you are using a Nerd Font: set icons.keys to an empty table which will use the
-        -- default which-key.nvim defined Nerd Font icons, otherwise define a string table
-        keys = vim.g.have_nerd_font and {} or {
-          Up = '<Up> ',
-          Down = '<Down> ',
-          Left = '<Left> ',
-          Right = '<Right> ',
-          C = '<C-…> ',
-          M = '<M-…> ',
-          D = '<D-…> ',
-          S = '<S-…> ',
-          CR = '<CR> ',
-          Esc = '<Esc> ',
-          ScrollWheelDown = '<ScrollWheelDown> ',
-          ScrollWheelUp = '<ScrollWheelUp> ',
-          NL = '<NL> ',
-          BS = '<BS> ',
-          Space = '<Space> ',
-          Tab = '<Tab> ',
-          F1 = '<F1>',
-          F2 = '<F2>',
-          F3 = '<F3>',
-          F4 = '<F4>',
-          F5 = '<F5>',
-          F6 = '<F6>',
-          F7 = '<F7>',
-          F8 = '<F8>',
-          F9 = '<F9>',
-          F10 = '<F10>',
-          F11 = '<F11>',
-          F12 = '<F12>',
-        },
-      },
+    config = function() -- This is the function that runs, AFTER loading
+      require('which-key').setup()
 
       -- Document existing key chains
-      spec = {
-        { '<leader>s', group = '[S]earch' },
-        { '<leader>t', group = '[T]oggle' },
-        { '<leader>h', group = 'Git [H]unk', mode = { 'n', 'v' } },
-      },
-    },
+      require('which-key').register {
+        ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
+        ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
+        ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
+        ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
+        ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
+      }
+    end,
   },
 
   -- NOTE: Plugins can specify dependencies.
@@ -353,6 +300,7 @@ require('lazy').setup({
   { -- Fuzzy Finder (files, lsp, etc)
     'nvim-telescope/telescope.nvim',
     event = 'VimEnter',
+    branch = '0.1.x',
     dependencies = {
       'nvim-lua/plenary.nvim',
       { -- If encountering errors, see telescope-fzf-native README for installation instructions
@@ -454,35 +402,21 @@ require('lazy').setup({
     end,
   },
 
-  -- LSP Plugins
-  {
-    -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
-    -- used for completion, annotations and signatures of Neovim apis
-    'folke/lazydev.nvim',
-    ft = 'lua',
-    opts = {
-      library = {
-        -- Load luvit types when the `vim.uv` word is found
-        { path = '${3rd}/luv/library', words = { 'vim%.uv' } },
-      },
-    },
-  },
-  {
-    -- Main LSP Configuration
+  { -- LSP Configuration & Plugins
     'neovim/nvim-lspconfig',
     dependencies = {
       -- Automatically install LSPs and related tools to stdpath for Neovim
-      -- Mason must be loaded before its dependents so we need to set it up here.
-      -- NOTE: `opts = {}` is the same as calling `require('mason').setup({})`
-      { 'williamboman/mason.nvim', opts = {} },
+      'williamboman/mason.nvim',
       'williamboman/mason-lspconfig.nvim',
       'WhoIsSethDaniel/mason-tool-installer.nvim',
 
       -- Useful status updates for LSP.
+      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
       { 'j-hui/fidget.nvim', opts = {} },
 
-      -- Allows extra capabilities provided by blink.cmp
-      'saghen/blink.cmp',
+      -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
+      -- used for completion, annotations and signatures of Neovim apis
+      { 'folke/neodev.nvim', opts = {} },
     },
     config = function()
       -- Brief aside: **What is LSP?**
@@ -522,60 +456,50 @@ require('lazy').setup({
           --
           -- In this case, we create a function that lets us more easily define mappings specific
           -- for LSP related items. It sets the mode, buffer and description for us each time.
-          local map = function(keys, func, desc, mode)
-            mode = mode or 'n'
-            vim.keymap.set(mode, keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
+          local map = function(keys, func, desc)
+            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
           end
 
-          -- Rename the variable under your cursor.
-          --  Most Language Servers support renaming across files, etc.
-          map('grn', vim.lsp.buf.rename, '[R]e[n]ame')
-
-          -- Execute a code action, usually your cursor needs to be on top of an error
-          -- or a suggestion from your LSP for this to activate.
-          map('gra', vim.lsp.buf.code_action, '[G]oto Code [A]ction', { 'n', 'x' })
-
-          -- Find references for the word under your cursor.
-          map('grr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
-
-          -- Jump to the implementation of the word under your cursor.
-          --  Useful when your language has ways of declaring types without an actual implementation.
-          map('gri', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
-
           -- Jump to the definition of the word under your cursor.
           --  This is where a variable was first declared, or where a function is defined, etc.
           --  To jump back, press <C-t>.
-          map('grd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+          map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
 
-          -- WARN: This is not Goto Definition, this is Goto Declaration.
-          --  For example, in C this would take you to the header.
-          map('grD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+          -- Find references for the word under your cursor.
+          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
 
-          -- Fuzzy find all the symbols in your current document.
-          --  Symbols are things like variables, functions, types, etc.
-          map('gO', require('telescope.builtin').lsp_document_symbols, 'Open Document Symbols')
-
-          -- Fuzzy find all the symbols in your current workspace.
-          --  Similar to document symbols, except searches over your entire project.
-          map('gW', require('telescope.builtin').lsp_dynamic_workspace_symbols, 'Open Workspace Symbols')
+          -- Jump to the implementation of the word under your cursor.
+          --  Useful when your language has ways of declaring types without an actual implementation.
+          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
 
           -- Jump to the type of the word under your cursor.
           --  Useful when you're not sure what type a variable is and you want to see
           --  the definition of its *type*, not where it was *defined*.
-          map('grt', require('telescope.builtin').lsp_type_definitions, '[G]oto [T]ype Definition')
+          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
 
-          -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10)
-          ---@param client vim.lsp.Client
-          ---@param method vim.lsp.protocol.Method
-          ---@param bufnr? integer some lsp support methods only in specific files
-          ---@return boolean
-          local function client_supports_method(client, method, bufnr)
-            if vim.fn.has 'nvim-0.11' == 1 then
-              return client:supports_method(method, bufnr)
-            else
-              return client.supports_method(method, { bufnr = bufnr })
-            end
-          end
+          -- Fuzzy find all the symbols in your current document.
+          --  Symbols are things like variables, functions, types, etc.
+          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+
+          -- Fuzzy find all the symbols in your current workspace.
+          --  Similar to document symbols, except searches over your entire project.
+          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+
+          -- Rename the variable under your cursor.
+          --  Most Language Servers support renaming across files, etc.
+          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+
+          -- Execute a code action, usually your cursor needs to be on top of an error
+          -- or a suggestion from your LSP for this to activate.
+          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
+
+          -- Opens a popup that displays documentation about the word under your cursor
+          --  See `:help K` for why this keymap.
+          map('K', vim.lsp.buf.hover, 'Hover Documentation')
+
+          -- WARN: This is not Goto Definition, this is Goto Declaration.
+          --  For example, in C this would take you to the header.
+          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
 
           -- The following two autocommands are used to highlight references of the
           -- word under your cursor when your cursor rests there for a little while.
@@ -583,75 +507,26 @@ require('lazy').setup({
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then
-            local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
+          if client and client.server_capabilities.documentHighlightProvider then
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
-              group = highlight_augroup,
               callback = vim.lsp.buf.document_highlight,
             })
 
             vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
               buffer = event.buf,
-              group = highlight_augroup,
               callback = vim.lsp.buf.clear_references,
             })
-
-            vim.api.nvim_create_autocmd('LspDetach', {
-              group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }),
-              callback = function(event2)
-                vim.lsp.buf.clear_references()
-                vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf }
-              end,
-            })
-          end
-
-          -- The following code creates a keymap to toggle inlay hints in your
-          -- code, if the language server you are using supports them
-          --
-          -- This may be unwanted, since they displace some of your code
-          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then
-            map('<leader>th', function()
-              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
-            end, '[T]oggle Inlay [H]ints')
           end
         end,
       })
 
-      -- Diagnostic Config
-      -- See :help vim.diagnostic.Opts
-      vim.diagnostic.config {
-        severity_sort = true,
-        float = { border = 'rounded', source = 'if_many' },
-        underline = { severity = vim.diagnostic.severity.ERROR },
-        signs = vim.g.have_nerd_font and {
-          text = {
-            [vim.diagnostic.severity.ERROR] = '󰅚 ',
-            [vim.diagnostic.severity.WARN] = '󰀪 ',
-            [vim.diagnostic.severity.INFO] = '󰋽 ',
-            [vim.diagnostic.severity.HINT] = '󰌶 ',
-          },
-        } or {},
-        virtual_text = {
-          source = 'if_many',
-          spacing = 2,
-          format = function(diagnostic)
-            local diagnostic_message = {
-              [vim.diagnostic.severity.ERROR] = diagnostic.message,
-              [vim.diagnostic.severity.WARN] = diagnostic.message,
-              [vim.diagnostic.severity.INFO] = diagnostic.message,
-              [vim.diagnostic.severity.HINT] = diagnostic.message,
-            }
-            return diagnostic_message[diagnostic.severity]
-          end,
-        },
-      }
-
       -- LSP servers and clients are able to communicate to each other what features they support.
       --  By default, Neovim doesn't support everything that is in the LSP specification.
-      --  When you add blink.cmp, luasnip, etc. Neovim now has *more* capabilities.
-      --  So, we create new capabilities with blink.cmp, and then broadcast that to the servers.
-      local capabilities = require('blink.cmp').get_lsp_capabilities()
+      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
+      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
+      local capabilities = vim.lsp.protocol.make_client_capabilities()
+      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
 
       -- Enable the following language servers
       --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
@@ -672,13 +547,13 @@ require('lazy').setup({
         -- Some languages (like typescript) have entire language plugins that can be useful:
         --    https://github.com/pmizio/typescript-tools.nvim
         --
-        -- But for many setups, the LSP (`ts_ls`) will work just fine
-        -- ts_ls = {},
+        -- But for many setups, the LSP (`tsserver`) will work just fine
+        -- tsserver = {},
         --
 
         lua_ls = {
-          -- cmd = { ... },
-          -- filetypes = { ... },
+          -- cmd = {...},
+          -- filetypes = { ...},
           -- capabilities = {},
           settings = {
             Lua = {
@@ -693,16 +568,13 @@ require('lazy').setup({
       }
 
       -- Ensure the servers and tools above are installed
-      --
-      -- To check the current status of installed tools and/or manually install
-      -- other tools, you can run
+      --  To check the current status of installed tools and/or manually install
+      --  other tools, you can run
       --    :Mason
       --
-      -- You can press `g?` for help in this menu.
-      --
-      -- `mason` had to be setup earlier: to configure its options see the
-      -- `dependencies` table for `nvim-lspconfig` above.
-      --
+      --  You can press `g?` for help in this menu.
+      require('mason').setup()
+
       -- You can add other tools here that you want Mason to install
       -- for you, so that they are available from within Neovim.
       local ensure_installed = vim.tbl_keys(servers or {})
@@ -712,14 +584,12 @@ require('lazy').setup({
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
       require('mason-lspconfig').setup {
-        ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer)
-        automatic_installation = false,
         handlers = {
           function(server_name)
             local server = servers[server_name] or {}
             -- This handles overriding only values explicitly passed
             -- by the server configuration above. Useful when disabling
-            -- certain features of an LSP (for example, turning off formatting for ts_ls)
+            -- certain features of an LSP (for example, turning off formatting for tsserver)
             server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
             require('lspconfig')[server_name].setup(server)
           end,
@@ -730,13 +600,12 @@ require('lazy').setup({
 
   { -- Autoformat
     'stevearc/conform.nvim',
-    event = { 'BufWritePre' },
-    cmd = { 'ConformInfo' },
+    lazy = false,
     keys = {
       {
         '<leader>f',
         function()
-          require('conform').format { async = true, lsp_format = 'fallback' }
+          require('conform').format { async = true, lsp_fallback = true }
         end,
         mode = '',
         desc = '[F]ormat buffer',
@@ -749,35 +618,30 @@ require('lazy').setup({
         -- have a well standardized coding style. You can add additional
         -- languages here or re-enable it for the disabled ones.
         local disable_filetypes = { c = true, cpp = true }
-        if disable_filetypes[vim.bo[bufnr].filetype] then
-          return nil
-        else
-          return {
-            timeout_ms = 500,
-            lsp_format = 'fallback',
-          }
-        end
+        return {
+          timeout_ms = 500,
+          lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype],
+        }
       end,
       formatters_by_ft = {
         lua = { 'stylua' },
         -- Conform can also run multiple formatters sequentially
         -- python = { "isort", "black" },
         --
-        -- You can use 'stop_after_first' to run the first available formatter from the list
-        -- javascript = { "prettierd", "prettier", stop_after_first = true },
+        -- You can use a sub-list to tell conform to run *until* a formatter
+        -- is found.
+        -- javascript = { { "prettierd", "prettier" } },
       },
     },
   },
 
   { -- Autocompletion
-    'saghen/blink.cmp',
-    event = 'VimEnter',
-    version = '1.*',
+    'hrsh7th/nvim-cmp',
+    event = 'InsertEnter',
     dependencies = {
-      -- Snippet Engine
+      -- Snippet Engine & its associated nvim-cmp source
       {
         'L3MON4D3/LuaSnip',
-        version = '2.*',
         build = (function()
           -- Build Step is needed for regex support in snippets.
           -- This step is not supported in many windows environments.
@@ -798,74 +662,82 @@ require('lazy').setup({
           --   end,
           -- },
         },
-        opts = {},
       },
-      'folke/lazydev.nvim',
+      'saadparwaiz1/cmp_luasnip',
+
+      -- Adds other completion capabilities.
+      --  nvim-cmp does not ship with all sources by default. They are split
+      --  into multiple repos for maintenance purposes.
+      'hrsh7th/cmp-nvim-lsp',
+      'hrsh7th/cmp-path',
     },
-    --- @module 'blink.cmp'
-    --- @type blink.cmp.Config
-    opts = {
-      keymap = {
-        -- 'default' (recommended) for mappings similar to built-in completions
-        --   <c-y> to accept ([y]es) the completion.
-        --    This will auto-import if your LSP supports it.
-        --    This will expand snippets if the LSP sent a snippet.
-        -- 'super-tab' for tab to accept
-        -- 'enter' for enter to accept
-        -- 'none' for no mappings
-        --
-        -- For an understanding of why the 'default' preset is recommended,
-        -- you will need to read `:help ins-completion`
+    config = function()
+      -- See `:help cmp`
+      local cmp = require 'cmp'
+      local luasnip = require 'luasnip'
+      luasnip.config.setup {}
+
+      cmp.setup {
+        snippet = {
+          expand = function(args)
+            luasnip.lsp_expand(args.body)
+          end,
+        },
+        completion = { completeopt = 'menu,menuone,noinsert' },
+
+        -- For an understanding of why these mappings were
+        -- chosen, you will need to read `:help ins-completion`
         --
         -- No, but seriously. Please read `:help ins-completion`, it is really good!
-        --
-        -- All presets have the following mappings:
-        -- <tab>/<s-tab>: move to right/left of your snippet expansion
-        -- <c-space>: Open menu or open docs if already open
-        -- <c-n>/<c-p> or <up>/<down>: Select next/previous item
-        -- <c-e>: Hide menu
-        -- <c-k>: Toggle signature help
-        --
-        -- See :h blink-cmp-config-keymap for defining your own keymap
-        preset = 'default',
+        mapping = cmp.mapping.preset.insert {
+          -- Select the [n]ext item
+          ['<C-n>'] = cmp.mapping.select_next_item(),
+          -- Select the [p]revious item
+          ['<C-p>'] = cmp.mapping.select_prev_item(),
 
-        -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
-        --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
-      },
+          -- Scroll the documentation window [b]ack / [f]orward
+          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
+          ['<C-f>'] = cmp.mapping.scroll_docs(4),
 
-      appearance = {
-        -- 'mono' (default) for 'Nerd Font Mono' or 'normal' for 'Nerd Font'
-        -- Adjusts spacing to ensure icons are aligned
-        nerd_font_variant = 'mono',
-      },
+          -- Accept ([y]es) the completion.
+          --  This will auto-import if your LSP supports it.
+          --  This will expand snippets if the LSP sent a snippet.
+          ['<C-y>'] = cmp.mapping.confirm { select = true },
 
-      completion = {
-        -- By default, you may press `<c-space>` to show the documentation.
-        -- Optionally, set `auto_show = true` to show the documentation after a delay.
-        documentation = { auto_show = false, auto_show_delay_ms = 500 },
-      },
+          -- Manually trigger a completion from nvim-cmp.
+          --  Generally you don't need this, because nvim-cmp will display
+          --  completions whenever it has completion options available.
+          ['<C-Space>'] = cmp.mapping.complete {},
 
-      sources = {
-        default = { 'lsp', 'path', 'snippets', 'lazydev' },
-        providers = {
-          lazydev = { module = 'lazydev.integrations.blink', score_offset = 100 },
+          -- Think of <c-l> as moving to the right of your snippet expansion.
+          --  So if you have a snippet that's like:
+          --  function $name($args)
+          --    $body
+          --  end
+          --
+          -- <c-l> will move you to the right of each of the expansion locations.
+          -- <c-h> is similar, except moving you backwards.
+          ['<C-l>'] = cmp.mapping(function()
+            if luasnip.expand_or_locally_jumpable() then
+              luasnip.expand_or_jump()
+            end
+          end, { 'i', 's' }),
+          ['<C-h>'] = cmp.mapping(function()
+            if luasnip.locally_jumpable(-1) then
+              luasnip.jump(-1)
+            end
+          end, { 'i', 's' }),
+
+          -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
+          --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
         },
-      },
-
-      snippets = { preset = 'luasnip' },
-
-      -- Blink.cmp includes an optional, recommended rust fuzzy matcher,
-      -- which automatically downloads a prebuilt binary when enabled.
-      --
-      -- By default, we use the Lua implementation instead, but you may enable
-      -- the rust implementation via `'prefer_rust_with_warning'`
-      --
-      -- See :h blink-cmp-config-fuzzy for more information
-      fuzzy = { implementation = 'lua' },
-
-      -- Shows a signature help window while you type arguments for a function
-      signature = { enabled = true },
-    },
+        sources = {
+          { name = 'nvim_lsp' },
+          { name = 'luasnip' },
+          { name = 'path' },
+        },
+      }
+    end,
   },
 
   { -- You can easily change to a different colorscheme.
@@ -875,18 +747,14 @@ require('lazy').setup({
     -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
     'folke/tokyonight.nvim',
     priority = 1000, -- Make sure to load this before all the other start plugins.
-    config = function()
-      ---@diagnostic disable-next-line: missing-fields
-      require('tokyonight').setup {
-        styles = {
-          comments = { italic = false }, -- Disable italics in comments
-        },
-      }
-
+    init = function()
       -- Load the colorscheme here.
       -- Like many other themes, this one has different styles, and you could load
       -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
       vim.cmd.colorscheme 'tokyonight-night'
+
+      -- You can configure highlights by doing something like:
+      vim.cmd.hi 'Comment gui=none'
     end,
   },
 
@@ -900,7 +768,7 @@ require('lazy').setup({
       --
       -- Examples:
       --  - va)  - [V]isually select [A]round [)]paren
-      --  - yinq - [Y]ank [I]nside [N]ext [Q]uote
+      --  - yinq - [Y]ank [I]nside [N]ext [']quote
       --  - ci'  - [C]hange [I]nside [']quote
       require('mini.ai').setup { n_lines = 500 }
 
@@ -933,10 +801,8 @@ require('lazy').setup({
   { -- Highlight, edit, and navigate code
     'nvim-treesitter/nvim-treesitter',
     build = ':TSUpdate',
-    main = 'nvim-treesitter.configs', -- Sets main module to use for opts
-    -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
     opts = {
-      ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'markdown_inline', 'query', 'vim', 'vimdoc' },
+      ensure_installed = { 'bash', 'c', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' },
       -- Autoinstall languages that are not installed
       auto_install = true,
       highlight = {
@@ -948,15 +814,24 @@ require('lazy').setup({
       },
       indent = { enable = true, disable = { 'ruby' } },
     },
-    -- There are additional nvim-treesitter modules that you can use to interact
-    -- with nvim-treesitter. You should go explore a few and see what interests you:
-    --
-    --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
-    --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
-    --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
+    config = function(_, opts)
+      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
+
+      -- Prefer git instead of curl in order to improve connectivity in some environments
+      require('nvim-treesitter.install').prefer_git = true
+      ---@diagnostic disable-next-line: missing-fields
+      require('nvim-treesitter.configs').setup(opts)
+
+      -- There are additional nvim-treesitter modules that you can use to interact
+      -- with nvim-treesitter. You should go explore a few and see what interests you:
+      --
+      --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
+      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
+      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
+    end,
   },
 
-  -- The following comments only work if you have downloaded the kickstart repo, not just copy pasted the
+  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
   -- init.lua. If you want these files, they are in the repository, so you can just download them and
   -- place them in the correct locations.
 
@@ -968,20 +843,13 @@ require('lazy').setup({
   -- require 'kickstart.plugins.debug',
   -- require 'kickstart.plugins.indent_line',
   -- require 'kickstart.plugins.lint',
-  -- require 'kickstart.plugins.autopairs',
-  -- require 'kickstart.plugins.neo-tree',
-  -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps
 
   -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
   --    This is the easiest way to modularize your config.
   --
   --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
+  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
   -- { import = 'custom.plugins' },
-  --
-  -- For additional information with loading, sourcing and examples see `:help lazy.nvim-🔌-plugin-spec`
-  -- Or use telescope!
-  -- In normal mode type `<space>sh` then write `lazy.nvim-plugin`
-  -- you can continue same window with `<space>sr` which resumes last telescope search
 }, {
   ui = {
     -- If you are using a Nerd Font: set icons to an empty table which will use the

lua/kickstart/health.lua

@@ -6,13 +6,13 @@
 --]]
 
 local check_version = function()
-  local verstr = tostring(vim.version())
-  if not vim.version.ge then
+  local verstr = string.format('%s.%s.%s', vim.version().major, vim.version().minor, vim.version().patch)
+  if not vim.version.cmp then
     vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))
     return
   end
 
-  if vim.version.ge(vim.version(), '0.10-dev') then
+  if vim.version.cmp(vim.version(), { 0, 9, 4 }) >= 0 then
     vim.health.ok(string.format("Neovim version is: '%s'", verstr))
   else
     vim.health.error(string.format("Neovim out of date: '%s'. Upgrade to latest stable or nightly", verstr))

lua/kickstart/plugins/autopairs.lua

@@ -1,8 +0,0 @@
--- autopairs
--- https://github.com/windwp/nvim-autopairs
-
-return {
-  'windwp/nvim-autopairs',
-  event = 'InsertEnter',
-  opts = {},
-}

lua/kickstart/plugins/debug.lua

@@ -24,59 +24,6 @@ return {
     -- Add your own debuggers here
     'leoluz/nvim-dap-go',
   },
-  keys = {
-    -- Basic debugging keymaps, feel free to change to your liking!
-    {
-      '<F5>',
-      function()
-        require('dap').continue()
-      end,
-      desc = 'Debug: Start/Continue',
-    },
-    {
-      '<F1>',
-      function()
-        require('dap').step_into()
-      end,
-      desc = 'Debug: Step Into',
-    },
-    {
-      '<F2>',
-      function()
-        require('dap').step_over()
-      end,
-      desc = 'Debug: Step Over',
-    },
-    {
-      '<F3>',
-      function()
-        require('dap').step_out()
-      end,
-      desc = 'Debug: Step Out',
-    },
-    {
-      '<leader>b',
-      function()
-        require('dap').toggle_breakpoint()
-      end,
-      desc = 'Debug: Toggle Breakpoint',
-    },
-    {
-      '<leader>B',
-      function()
-        require('dap').set_breakpoint(vim.fn.input 'Breakpoint condition: ')
-      end,
-      desc = 'Debug: Set Breakpoint',
-    },
-    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
-    {
-      '<F7>',
-      function()
-        require('dapui').toggle()
-      end,
-      desc = 'Debug: See last session result.',
-    },
-  },
   config = function()
     local dap = require 'dap'
     local dapui = require 'dapui'
@@ -84,7 +31,7 @@ return {
     require('mason-nvim-dap').setup {
       -- Makes a best effort to setup the various debuggers with
       -- reasonable debug configurations
-      automatic_installation = true,
+      automatic_setup = true,
 
       -- You can provide additional configuration to the handlers,
       -- see mason-nvim-dap README for more information
@@ -98,6 +45,16 @@ return {
       },
     }
 
+    -- Basic debugging keymaps, feel free to change to your liking!
+    vim.keymap.set('n', '<F5>', dap.continue, { desc = 'Debug: Start/Continue' })
+    vim.keymap.set('n', '<F1>', dap.step_into, { desc = 'Debug: Step Into' })
+    vim.keymap.set('n', '<F2>', dap.step_over, { desc = 'Debug: Step Over' })
+    vim.keymap.set('n', '<F3>', dap.step_out, { desc = 'Debug: Step Out' })
+    vim.keymap.set('n', '<leader>b', dap.toggle_breakpoint, { desc = 'Debug: Toggle Breakpoint' })
+    vim.keymap.set('n', '<leader>B', function()
+      dap.set_breakpoint(vim.fn.input 'Breakpoint condition: ')
+    end, { desc = 'Debug: Set Breakpoint' })
+
     -- Dap UI setup
     -- For more information, see |:help nvim-dap-ui|
     dapui.setup {
@@ -120,29 +77,14 @@ return {
       },
     }
 
-    -- Change breakpoint icons
-    -- vim.api.nvim_set_hl(0, 'DapBreak', { fg = '#e51400' })
-    -- vim.api.nvim_set_hl(0, 'DapStop', { fg = '#ffcc00' })
-    -- local breakpoint_icons = vim.g.have_nerd_font
-    --     and { Breakpoint = '', BreakpointCondition = '', BreakpointRejected = '', LogPoint = '', Stopped = '' }
-    --   or { Breakpoint = '●', BreakpointCondition = '⊜', BreakpointRejected = '⊘', LogPoint = '◆', Stopped = '⭔' }
-    -- for type, icon in pairs(breakpoint_icons) do
-    --   local tp = 'Dap' .. type
-    --   local hl = (type == 'Stopped') and 'DapStop' or 'DapBreak'
-    --   vim.fn.sign_define(tp, { text = icon, texthl = hl, numhl = hl })
-    -- end
+    -- Toggle to see last session result. Without this, you can't see session output in case of unhandled exception.
+    vim.keymap.set('n', '<F7>', dapui.toggle, { desc = 'Debug: See last session result.' })
 
     dap.listeners.after.event_initialized['dapui_config'] = dapui.open
     dap.listeners.before.event_terminated['dapui_config'] = dapui.close
     dap.listeners.before.event_exited['dapui_config'] = dapui.close
 
     -- Install golang specific config
-    require('dap-go').setup {
-      delve = {
-        -- On Windows delve must be run attached or it crashes.
-        -- See https://github.com/leoluz/nvim-dap-go/blob/main/README.md#configuring
-        detached = vim.fn.has 'win32' == 0,
-      },
-    }
+    require('dap-go').setup()
   end,
 }

lua/kickstart/plugins/gitsigns.lua

@@ -1,61 +0,0 @@
--- Adds git related signs to the gutter, as well as utilities for managing changes
--- NOTE: gitsigns is already included in init.lua but contains only the base
--- config. This will add also the recommended keymaps.
-
-return {
-  {
-    'lewis6991/gitsigns.nvim',
-    opts = {
-      on_attach = function(bufnr)
-        local gitsigns = require 'gitsigns'
-
-        local function map(mode, l, r, opts)
-          opts = opts or {}
-          opts.buffer = bufnr
-          vim.keymap.set(mode, l, r, opts)
-        end
-
-        -- Navigation
-        map('n', ']c', function()
-          if vim.wo.diff then
-            vim.cmd.normal { ']c', bang = true }
-          else
-            gitsigns.nav_hunk 'next'
-          end
-        end, { desc = 'Jump to next git [c]hange' })
-
-        map('n', '[c', function()
-          if vim.wo.diff then
-            vim.cmd.normal { '[c', bang = true }
-          else
-            gitsigns.nav_hunk 'prev'
-          end
-        end, { desc = 'Jump to previous git [c]hange' })
-
-        -- Actions
-        -- visual mode
-        map('v', '<leader>hs', function()
-          gitsigns.stage_hunk { vim.fn.line '.', vim.fn.line 'v' }
-        end, { desc = 'git [s]tage hunk' })
-        map('v', '<leader>hr', function()
-          gitsigns.reset_hunk { vim.fn.line '.', vim.fn.line 'v' }
-        end, { desc = 'git [r]eset hunk' })
-        -- normal mode
-        map('n', '<leader>hs', gitsigns.stage_hunk, { desc = 'git [s]tage hunk' })
-        map('n', '<leader>hr', gitsigns.reset_hunk, { desc = 'git [r]eset hunk' })
-        map('n', '<leader>hS', gitsigns.stage_buffer, { desc = 'git [S]tage buffer' })
-        map('n', '<leader>hu', gitsigns.stage_hunk, { desc = 'git [u]ndo stage hunk' })
-        map('n', '<leader>hR', gitsigns.reset_buffer, { desc = 'git [R]eset buffer' })
-        map('n', '<leader>hp', gitsigns.preview_hunk, { desc = 'git [p]review hunk' })
-        map('n', '<leader>hb', gitsigns.blame_line, { desc = 'git [b]lame line' })
-        map('n', '<leader>hd', gitsigns.diffthis, { desc = 'git [d]iff against index' })
-        map('n', '<leader>hD', function()
-          gitsigns.diffthis '@'
-        end, { desc = 'git [D]iff against last commit' })
-        -- Toggles
-        map('n', '<leader>tb', gitsigns.toggle_current_line_blame, { desc = '[T]oggle git show [b]lame line' })
-        map('n', '<leader>tD', gitsigns.preview_hunk_inline, { desc = '[T]oggle git show [D]eleted' })
-      end,
-    },
-  },
-}

lua/kickstart/plugins/lint.lua

@@ -47,12 +47,7 @@ return {
       vim.api.nvim_create_autocmd({ 'BufEnter', 'BufWritePost', 'InsertLeave' }, {
         group = lint_augroup,
         callback = function()
-          -- Only run the linter in buffers that you can modify in order to
-          -- avoid superfluous noise, notably within the handy LSP pop-ups that
-          -- describe the hovered symbol using Markdown.
-          if vim.opt_local.modifiable:get() then
-            lint.try_lint()
-          end
+          require('lint').try_lint()
         end,
       })
     end,

lua/kickstart/plugins/neo-tree.lua

@@ -1,25 +0,0 @@
--- Neo-tree is a Neovim plugin to browse the file system
--- https://github.com/nvim-neo-tree/neo-tree.nvim
-
-return {
-  'nvim-neo-tree/neo-tree.nvim',
-  version = '*',
-  dependencies = {
-    'nvim-lua/plenary.nvim',
-    'nvim-tree/nvim-web-devicons', -- not strictly required, but recommended
-    'MunifTanjim/nui.nvim',
-  },
-  cmd = 'Neotree',
-  keys = {
-    { '\\', ':Neotree reveal<CR>', desc = 'NeoTree reveal', silent = true },
-  },
-  opts = {
-    filesystem = {
-      window = {
-        mappings = {
-          ['\\'] = 'close_window',
-        },
-      },
-    },
-  },
-}